To write on the top of the arm, make sure the top plane is selected and create a general shape there. Next, select the shape and you can add text to that area. For the arm, I would recommend using an extrusion greater than 1.5 mm to be able to see clearly the small text.
To write on the top of the arm, make sure the top plane is selected and create a general shape there. Next, select the shape and you can add text to that area. For the arm, I would recommend using a extrusion greater than 1.5 mm to be able to see clearly the small text.
I used this tutorial to build parts for the DAMNED project in ECEG 201. It was very helpful! A tip for using this machine is to change the x-rotation parameter to 270 to rotate a piece from upright to flat on the ground for the DAMNED pieces.
Reputation over time
It looks like this user hasn't gained any reputation yet.
Once they have, you'll be able to view a graph of their reputation gained over time.
Here's a preview of what the graph will look like:
To write on the top of the arm, make sure the top plane is selected and create a general shape there. Next, select the shape and you can add text to that area. For the arm, I would recommend using an extrusion greater than 1.5 mm to be able to see clearly the small text.
To write on the top of the arm, make sure the top plane is selected and create a general shape there. Next, select the shape and you can add text to that area. For the arm, I would recommend using a extrusion greater than 1.5 mm to be able to see clearly the small text.
I used this tutorial to build parts for the DAMNED project in ECEG 201. It was very helpful! A tip for using this machine is to change the x-rotation parameter to 270 to rotate a piece from upright to flat on the ground for the DAMNED pieces.