-
-
Plug in the DC Power cable and then hold power button until light turns orange as pictured
-
Once the light turns blue/white, there are two options: using the IPad app or using the Moku Master software. If you are using the ipad app, see step 2. If you are using the moku master software, see step 3
-
-
-
The Moku:Lab uses a wireless access point to interface with whichever device you want to use
-
First, open the settings app on the IPad.
-
Next, go to WIFI settings and find the WIFI network titled "Moku-XXXXXX". If prompted for a password, type "mokuadmin" as this is the default password.
-
Next, open the Moku IPad app and select your device. After you've selected your device, select the "Go!" button in the bottom right of the screen
-
You will then be prompted with all of the available instruments offered on the Moku:Lab
-
The slot on the top of the Moku:Lab acts as a stand for the IPad, as pictured.
-
-
-
The Moku:Lab uses a wireless access point to interface with whichever device you want to use
-
First, go to WIFI settings on your device and find the WIFI network titled "Moku-XXXXXX". If prompted for a password, type "mokuadmin" as this is the default password.
-
After connecting to the Moku"s wifi network, open the moku master software. Your device should be recognized by the software. Click your moku device and you will see the tool selection screen.
-
Some of the tools are only accessible from the iPad app
-
