Skip to main content

Beta

Minor Versionm

by Matt P. Lamparter

Introduction

This guide will show you how to use the automatic milk frother to make a cup of cappuccino, latte, etc.

  1. Locate the milk jug, make sure there is a frothing whisk
    • Locate the milk jug, make sure there is a frothing whisk

    • Open the lid and add milk accordingly:

    • If frothing milk with or without heating: add 150-250ml of milk indicated by the MIN line and the middle MAX line

    • If heating WITHOUT frothing milk: add 150-500 ml of milk indicated by the MIN line and the top MAX line

    • DO NOT go over the MAX line, milk will greatly expand in volume after frothing and can spill out

    • Close the lid and place it onto the power base

  2. Press the selector. There are 4 modes depending on your usage: Red: Heating and frothing milk. Press 1 time
    • Press the selector. There are 4 modes depending on your usage:

    • Red: Heating and frothing milk. Press 1 time

    • Orange: Heating without frothing. Press 2 times

    • Light Purple: Heating chocolate milk

    • Light Blue: Frothing without heating

    • After flashing for 3 seconds, the machine will run. Machine and indicator light will turn off after the milk is ready

    • Rinse the milk jug and the lid

    • Remember that not cleaning up after yourself may cause you to lose your certification!

Finish Line

3 other people completed this guide.

Matt P. Lamparter

Member since: 08/15/2017

28 Guides authored

Team

Engineering Lab Directors Member of Engineering Lab Directors

3 Members

34 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 59